2.
What is added to water during wet removal?
3.
How many times a year must medical monitoring be performed?
4.
How many times a year should an employee be trained?
5.
Which of the following is always required for ACM abatement?
6.
When is dry removal of asbestos containing materials (ACM) permitted?
7.
Personal air sample results reveal levels exceeding the permissible exposure limit. When must the employer relay this information to affected employees?
8.
Who must give approval before an asbestos abatement job can begin?
9.
NESHAP requirements for EPA notification invlove:
10.
How often should fit tests be performed?
11.
What sort of PPE (personal protective equipment) is recommended when using cleaning solvent?
12.
What should be done with lifelines, safety harnesses, and shock-absorbing lanyards that have been subjected to impact loading?
13.
What is the longest standard length of a scaffold plank?
14.
On a 120V circuit, what color is the (protective) ground wire?
15.
What is the minimum distance apart that acetylene and oxygen cylinders must be stored?
16.
Which of the following is a correct method for storing acetylene cylinders?
17.
Which of the following is the best choice for hoisting a full gas cylinder?
18.
Cylinders containing ______ shall not be taken into confined spaces.
19.
A dry chemical or carbon dioxide fire extinguisher rated at least ______ must be kept near operations where bottled fuel gases are being used.
20.
No more than ______ of paints, solvents, and chemicals may be stored in a room unless an approved safety storage cabinet is present.
