Free C6 Cabinet, Millwork and Finish Carpentry Exam

Welcome to your free C-6 Cabinet, Millwork and Finish Carpentry Quiz

REQUIRED - Enter your email address to receive a printable copy of your test results.
1. 
Hard hats are required, except:

2. 
If a circle has a radius of 12, what is its diameter?

3. 
Which items must be to be provided by an employer at a job site?

4. 
An astragal molding is used:

5. 
Which of the following nails has the greatest diameter?

6. 
What should a contractor use when installing 30' high crown molding?

7. 
What is the maximum weight a premium cabinet drawer can hold?

8. 
What is the minimum weight a handrail should be able to support?

9. 
Who cuts the opening for a sink countertop?

10. 
What is the difference between a 2" finish nail and a brad nail?

11. 
What sort of PPE (personal protective equipment) is recommended when using cleaning solvent?

12. 
What should be done with lifelines, safety harnesses, and shock-absorbing lanyards that have been subjected to impact loading?

13. 
What is the longest standard length of a scaffold plank?

14. 
On a 120V circuit, what color is the (protective) ground wire?

15. 
What is the minimum distance apart that acetylene and oxygen cylinders must be stored?

16. 
Which of the following is a correct method for storing acetylene cylinders?

17. 
Which of the following is the best choice for hoisting a full gas cylinder?

18. 
Cylinders containing ______ shall not be taken into confined spaces.

19. 
A dry chemical or carbon dioxide fire extinguisher rated at least ______ must be kept near operations where bottled fuel gases are being used.

20. 
No more than ______ of paints, solvents, and chemicals may be stored in a room unless an approved safety storage cabinet is present.