Free C-35 Practice Quiz: Take our 2019 exam, see where you stand! - California.USTradeTest.com

What is the MINIMUM thickness required for line wire for the backing on open wood frames?

No. 12 gauge

No. 16 gauge

No. 18 gauge

No. 24 gauge

Correct! Wrong!

When framing around the door of a non-load bearing double channel stud hollow partition, the jack studs located above the head of the door frame should be stiffened with steel channel horizontal stiffener. This stiffener should extend at LEAST how far beyond each side of the opening?

One stud space or two full height studs.

Three stud spaces or four full height studs.

To the first full height stud.

Two stud spaces or three full height studs.

Correct! Wrong!

Where is white coat applied?

Over gypsum plaster base coat.

Over painted surfaces only.

To metal lath.

To wire fabric.

Correct! Wrong!

How many square yards of plaster will be required to plaster fifteen 12’ high round columns with a 3’ diameter?

60 sq. yards.

113 sq. yards.

188 sq. yards.

240 sq. yards.

Correct! Wrong!

What is the recommended mixing time when using a mixer to prepare plastic portland cement plaster for a brown coat?

1 – 2 minutes.

3 – 5 minutes.

6 – 12 minutes.

13 – 18 minutes.

Correct! Wrong!

According to Cal/OSHA, the top handrail around scaffolding should be at what MINIMUM height?

36”

38”

42"

44"

Correct! Wrong!

What is the main purpose of a dash-bond coat?

To act as an intermediate bonding coat between layers.

To make a firm bond for subsequent coats.

To provide a finishing coat.

To provide a smooth surface.

Correct! Wrong!

What is the recommended thickness of plaster over metal lath?

1/4"

1/3"

1/2"

5/8"

Correct! Wrong!

Metal lath must be placed on supports so that.

A 1/4" space is left between laths.

The edges butt horizontally.

The lower sheet laps over the upper.

The upper sheet laps over the lower.

Correct! Wrong!

When fireproofing structural members, which of the following statements are correct?

Fireproofing may be directly applied to members with base and finish coat.

Fireproofing may be sprayed directly on members with one coat.

Members must be lathed or wrapped with wire fabric before fireproofing.

Wrap with aluminum foil and apply fireproofing.

Correct! Wrong!

Free C-35 Practice Quiz: Take our 2019 exam, see where you stand!

FAIL - You did not pass the trade portion of the C-35 Lathing & Plastering practice exam.

You need our help! Call us from 8am-10pm, Mon-Sat, for a free consultation. We promise you will be very glad you did!

Click Here to take the Law & Business exam

PASS- You have passed the trade portion of the C-35 Lathing & Plastering practice exam.

You did pretty well! Call us from 8am-10pm, Mon-Sat, for a free consultation. We promise you will be very glad you did!

What is the MINIMUM thickness required for line wire for the backing on open wood frames?

When framing around the door of a non-load bearing double channel stud hollow partition, the jack studs located above the head of the door frame should be stiffened with steel channel horizontal stiffener. This stiffener should extend at LEAST how far beyond each side of the opening?

Where is white coat applied?

How many square yards of plaster will be required to plaster fifteen 12’ high round columns with a 3’ diameter?

What is the recommended mixing time when using a mixer to prepare plastic portland cement plaster for a brown coat?

According to Cal/OSHA, the top handrail around scaffolding should be at what MINIMUM height? ​

What is the main purpose of a dash-bond coat?

What is the recommended thickness of plaster over metal lath?

Metal lath must be placed on supports so that.

When fireproofing structural members, which of the following statements are correct?

Click Here to take the Law & Business exam

Click Here to take the Law & Business exam

According to Cal/OSHA, the top handrail around scaffolding should be at what MINIMUM height?